test
Via Provinciale Sud, 5 - Bagnolo in Piano (RE) Italy
+39 0522 956911
fibrotubi@fibrotubi.it
itfren
REQUEST A QUOTE

COMPONENTS FOR SUPPORTING AND FIXING CHIMNEYS

Accessories

PRESENTATION

The Eterinox Line Single Wall Accessories include a wide range of components to complete the installation of the Flue System, including: collars, converse covering, chimney supports, silicones, identification plates, etc..

Fixing Collar with Dowel

Adjustable wall bracket

Adjustable wall collar

Silicone Cartridge (Red) heat resistant up to 300°C

Converse covering (to couple with the converses)

Stainless steel converse, slanting 5°-30° and flat 0°

Refractory mortar (Black) Heat-resistant up to 1.200° C

FITTING THE COVER OF THE SLANTED OR FLAT STAINLESS STEEL CONVERSE

  • Phase 1:  Working from the top, place the flat or slanted converse on the end part the cover.
  • Phase 2:  Wrap the converse covering around the pipe, tightening the fixings and sealing with silicone

                              Phase 1                                 Phase 2

fasi-installazione

 

MOUNTING THE ADJUSTABLE WALL BRACKET

The adjustable wall bracket is not designed to support the weight of the elements but simply to keep them anchored to the wall.

fermo-1 collare-2 dado-esagonale bullone
Retainer: 1 pc Collar: 2 pcs D8 DIN hexagonal nut D.8 bolt
L=100 mm DIN933: 2 pcs

 

Notes:

  • Maximum distance between two adjustable wall brackets: 2m
  • Maximum height from the last adjustable wall bracket: 1.5m (stainless steel) 1.2m (copper)
  • Adjustability: from min. 3cm to max. 8cm

Note: the values given refer to a closed bracket; the reinforcement is available from diam. 180 to diam. 400

 

fase-1 fase-2
Phase 1::
Fix the retainer on the wall with appropriate expansion bolts (not supplied)		 Phase 2:
Tighten the two bolts supplied on the retainer with their nuts
fase-3 fase-4
Phase 1::
Put another two nuts in and tighten them to reach the distance required. Put the first collar on.		 Phase 4:
Put the element against the first collar. Put the second collar on and tighten with the remaining nuts.

Accessories for single wall

STAINLESS STEEL LONG BRACKETS

This component is normally used together with the 0° outlet Element for both the single and dual wall chimney.
It can be used to support sub-horizontal sections of the pipe.
mensole-inox

Codice Dn A B C
4578 0080 80 125 40 250
4578 0100 100 125 40 250
4578 0120 120 160 40 250
4578 0130 130 160 40 250
4578 0140 140 160 40 250
4578 0150 150 160 40 250
4578 0160 160 160 40 250
4578 0180 180 200 40 333
4578 0200 200 200 40 333
4578 0230 230 200 40 333
4578 0250 250 200 40 333
4578 0300 300 250 40 400
4578 0350 350 250 40 500
4578 0400 400 250 40 500

ADJUSTABLE WALL BRACKET

Used to anchor the chimney/flue to the wall. Its peculiarity is that the distance from the wall can be adjusted.

staffa-a-muro-regolabile

Codice Dn A B C D
4533 0080 80 75 155 160 57
4533 0100 100 85 165 180 77
4533 0120 120 95 175 210 82
4533 0130 130 100 180 210 82
4533 0140 140 105 185 230 92
4533 0150 150 110 190 230 92
4533 0160 160 115 195 230 92
4533 0180 180 125 205 260 107
4533 0200 200 135 215 280 117
4533 0230 230 150 230 310 132
4533 0250 250 160 240 330 142
4533 0300 300 185 265 380 167
4533 0350 350 210 290 430 192
4533 0400 400 235 315 480 217

ADJUSTABLE WALL COLLAR (EVERY 2 M)

Used to anchor the chimney, flue and smoke duct to the wall. Its peculiarity is that the distance from the wall can be adjusted.

collare-a-parete-regolabile

Codice Dn A B
4120 0080 80 140 200
4120 0100 100 150 210
4120 0120 120 160 220
4120 0130 130 165 225
4120 0140 140 170 230
4120 0150 150 175 235
4120 0160 160 – –
4120 0180 180 – –
4120 0200 200 – –
4120 0230 230 – –
4120 0250 250 – –
4120 0300 300 – –
4120 0350 350 – –
4120 0400 400 – –

SPACER COLLAR

This component is necessary for centring the duct inside the shaft/equipment slot.

collare-distanziatore

Codice Dn A
4521 0080 80 170
4521 0100 100 190
4521 0120 120 210
4521 0130 130 220
4521 0140 140 230
4521 0150 150 240
4521 0160 160 250
4521 0180 180 270
4521 0200 200 290
4521 0230 230 320
4521 0250 250 340
4521 0300 300 390
4521 0350 350 440
4521 0400 400 490

CHIMNEY WALL SUPPORT

This component is necessary for supporting the chimney/flue if there are no other existing supports. Consult the “Compressive Strength” chart for the self-support values.

supporto-camino-muro

Codice Dn A B C A/2
4519 0080 80 250 241 125 125
4519 0100 100 250 241 125 125
4519 0120 120 250 241 125 125
4519 0130 130 250 241 125 125
4519 0140 140 250 241 125 125
4519 0150 150 250 241 125 125
4519 0160 160 250 241 125 125
4519 0180 180 333 320 200 166,5
4519 0200 200 333 320 200 166,5
4519 0230 230 333 320 200 166,5
4519 0250 250 333 320 200 166,5
4519 0300 300 400 320 200 200
4519 0350 350 500 320 200 250
4519 0400 400 500 320 200 250

WIND ANCHORING RING

To use for bracing a chimney that has no other kind of support.

anello-camino-vento

Codice Dn
4532 0080 80
4532 0100 100
4532 0120 120
4532 0130 130
4532 0140 140
4532 0150 150
4532 0160 160
4532 0180 180
4532 0200 200
4532 0230 230
4532 0250 250
4532 0300 300
4532 0350 350
4532 0400 400

FEMALE COUPLING STAINLESS STEEL PLUG

Used as closing plug. The female socket allows the closing of all male couplings. It is also available in the male socket version, art. 45130.

tappo-inox-innesto-femmina

Codice Dn A
45131 0080 80 75
45131 0100 100 79
45131 0120 120 82
45131 0130 130 85
45131 0140 140 87
45131 0150 150 89
45131 0160 160 91
45131 0180 180 95
45131 0200 200 98
45131 0230 230 95
45131 0250 250 109
45131 0300 300 107
45131 0350 350 112
45131 0400 400 115

PLUG FOR A COMPENSATORY INLET

This component allows air to enter the chimney or shared flue. The free section is expressed in cm2 in column C.

tapo-presa-compensazione

Codice Dn A B C
4544 0080 80 67 40 13
4544 0100 100 71 40 16
4544 0120 120 74 40 29
4544 0130 130 77 40 35
4544 0140 140 79 40 45
4544 0150 150 81 40 48
4544 0160 160 83 40 54
4544 0180 180 87 40 79
4544 0200 200 90 40 99
4544 0230 230 87 40 139
4544 0250 250 101 40 162
4544 0300 300 99 40 241
4544 0350 350 – – –
4544 0400 400 – – –

CONVERSE COVERING (TO COUPLE WITH THE CONVERSES)

This component is to be used as flashing to tighten on the pipe. Coupled with converse code 4510…. and code 4511…. prevents water from infiltrating.

copertina-conversa

Codice Dn A B
4512 0080 80 60 170
4512 0100 100 60 190
4512 0120 120 60 210
4512 0130 130 60 220
4512 0140 140 60 230
4512 0150 150 60 240
4512 0160 160 60 250
4512 0180 180 60 320
4512 0200 200 60 320
4512 0230 230 60 320
4512 0250 250 60 370
4512 0300 300 60 420
4512 0350 350 60 480
4512 0400 400 60 520

STAINLESS STEEL CONVERSE, SLANTING 5°-30°

To use on roofs with a 5 to 30 degree slant. Coupled with converse covering code 4512…prevents water from infiltrating.

conversa-inox-pendente-5-30

Codice Dn A B C D
4511 0080 80 155 120 485 485
4511 0100 100 155 140 485 485
4511 0120 120 155 160 485 485
4511 0130 130 155 160 485 485
4511 0140 140 155 180 485 485
4511 0150 150 155 180 485 485
4511 0160 160 155 200 485 485
4511 0180 180 180 230 485 485
4511 0200 200 180 250 485 485
4511 0230 230 180 270 612 980
4511 0250 250 245 300 612 980
4511 0300 300 245 350 612 980
4511 0350 350 245 400 715 980
4511 0400 400 245 450 715 980

STAINLESS STEEL CONVERSE, FLAT 0°

To use on flat roofs. Coupled with converse covering code 4512…prevents water from infiltrating.

conversa-inox-pendente-5-30

Codice Dn A B C D
4510 0080 80 155 120 485 485
4510 0100 100 155 140 485 485
4510 0120 120 155 160 485 485
4510 0130 130 155 160 485 485
4510 0140 140 155 180 485 485
4510 0150 150 155 180 485 485
4510 0160 160 155 200 485 485
4510 0180 180 180 230 485 485
4510 0200 200 180 250 485 485
4510 0230 230 180 270 485 485
4510 0250 250 245 300 485 485
4510 0300 300 245 350 612 612
4510 0350 350 245 400 612 612
4510 0400 400 245 450 612 612

CONDENSATION COLLECTION END PLATE

Closing component that can be used as the end part of the pipe with the peculiarity of sliding inside it.

piastra-terminale-raccogli-condensa

Codice Dn A B C
4110 0080 80 495 78 320
4110 0100 100 495 98 320
4110 0120 120 495 118 320
4110 0130 130 495 128 320
4110 0140 140 495 138 320
4110 0150 150 495 148 485
4110 0160 160 495 158 485
4110 0180 180 495 178 485
4110 0200 200 495 198 485
4110 0230 230 495 228 485
4110 0250 250 495 248 485
4110 0300 300 495 298 485
4110 0350 350 495 348 485
4110 0400 400 495 398 485

ROUND SEALING PLUG

Used as a watertight closing plug T200 P1 on a male coupling. The sealing ring conforms to EN 14241/1. In the art.4592 version the sealing ring is replaced by a steel spring by means of which a T600 N1 designation can be obtained.
tappo-tondo-a-tenuta-T200

Codice Dn A B C
4540 0080 80 75 22 88
4540 0100 100 95 22 108
4540 0120 120 115 22 128
4540 0130 130 125 22 138
4540 0140 140 135 22 148
4540 0150 150 145 22 158
4540 0160 160 155 22 168
4540 0180 180 175 22 188
4540 0200 200 195 22 208
4540 0230 230 – – –
4540 0250 250 245 22 258
4540 0300 300 195 22 308
4540 0350 350 – – –
4540 0400 400 – – –

SINGLE-WALL FLAT PLATE FOR SLAB FINISHING

This component is used to restore passage holes in structures and walls. It is not to be used to protect combustible materials. It may also be used on the slant in which case distances A and D vary.
piastra-piana-monoparete

Codice Dn A B C D
45390 0080 80 100 200 330 320
45390 0100 100 120 200 330 320
45390 0120 120 140 200 330 320
45390 0130 130 150 200 330 320
45390 0140 140 160 200 330 320
45390 0150 150 170 200 330 485
45390 0160 160 180 200 330 485
45390 0180 180 200 200 330 485
45390 0200 200 220 200 330 485
45390 0230 230 250 200 330 485
45390 0250 250 270 200 330 485
45390 0300 300 320 200 330 485
45390 0350 350 370 200 330 485
45390 0400 400 420 200 330 485
MAIN FEATURES
  • Adaptable to all situations
  • Quick and easy to mount
  • Silicone sealants for high temperatures
  • Complete range
category index 
Clear Filters
MAT SERIES – AISI 316L STAINLESS STEEL QUICK COUPLING SINGLE WALL WITH LOCKING CLAMP
MAT SERIES – AISI 316L STAINLESS STEEL QUICK COUPLING SINGLE WALL WITH LOCKING CLAMP
ACCESSORIES – COMPONENTS FOR SUPPORTING AND FIXING CHIMNEYS
ACCESSORIES – COMPONENTS FOR SUPPORTING AND FIXING CHIMNEYS
OVAL SERIES – SINGLE WALL IN AISI 316L STAINLESS STEEL WITH OVAL SECTION
OVAL SERIES – SINGLE WALL IN AISI 316L STAINLESS STEEL WITH OVAL SECTION
FLEX SERIES – FLEXIBLE WITH SMOOTH INNER SURFACE
FLEX SERIES – FLEXIBLE WITH SMOOTH INNER SURFACE
INSULATION – LAGGING FOR FLUE SYSTEMS IN ROLLS AND/OR CUPELS
INSULATION – LAGGING FOR FLUE SYSTEMS IN ROLLS AND/OR CUPELS
MAIN FEATURES
  • Adaptable to all situations
  • Quick and easy to mount
  • Silicone sealants for high temperatures
  • Complete range

PRESENTATION

The Eterinox Line Single Wall Accessories include a wide range of components to complete the installation of the Flue System, including: collars, converse covering, chimney supports, silicones, identification plates, etc..

Fixing Collar with Dowel

Adjustable wall bracket

Adjustable wall collar

Silicone Cartridge (Red) heat resistant up to 300°C

Converse covering (to couple with the converses)

Stainless steel converse, slanting 5°-30° and flat 0°

Refractory mortar (Black) Heat-resistant up to 1.200° C

FITTING THE COVER OF THE SLANTED OR FLAT STAINLESS STEEL CONVERSE

  • Phase 1:  Working from the top, place the flat or slanted converse on the end part the cover.
  • Phase 2:  Wrap the converse covering around the pipe, tightening the fixings and sealing with silicone

                              Phase 1                                 Phase 2

fasi-installazione

 

MOUNTING THE ADJUSTABLE WALL BRACKET

The adjustable wall bracket is not designed to support the weight of the elements but simply to keep them anchored to the wall.

fermo-1 collare-2 dado-esagonale bullone
Retainer: 1 pc Collar: 2 pcs D8 DIN hexagonal nut D.8 bolt
L=100 mm DIN933: 2 pcs

 

Notes:

  • Maximum distance between two adjustable wall brackets: 2m
  • Maximum height from the last adjustable wall bracket: 1.5m (stainless steel) 1.2m (copper)
  • Adjustability: from min. 3cm to max. 8cm

Note: the values given refer to a closed bracket; the reinforcement is available from diam. 180 to diam. 400

 

fase-1 fase-2
Phase 1::
Fix the retainer on the wall with appropriate expansion bolts (not supplied)		 Phase 2:
Tighten the two bolts supplied on the retainer with their nuts
fase-3 fase-4
Phase 1::
Put another two nuts in and tighten them to reach the distance required. Put the first collar on.		 Phase 4:
Put the element against the first collar. Put the second collar on and tighten with the remaining nuts.

Accessories for single wall

STAINLESS STEEL LONG BRACKETS

This component is normally used together with the 0° outlet Element for both the single and dual wall chimney.
It can be used to support sub-horizontal sections of the pipe.
mensole-inox

Codice Dn A B C
4578 0080 80 125 40 250
4578 0100 100 125 40 250
4578 0120 120 160 40 250
4578 0130 130 160 40 250
4578 0140 140 160 40 250
4578 0150 150 160 40 250
4578 0160 160 160 40 250
4578 0180 180 200 40 333
4578 0200 200 200 40 333
4578 0230 230 200 40 333
4578 0250 250 200 40 333
4578 0300 300 250 40 400
4578 0350 350 250 40 500
4578 0400 400 250 40 500

ADJUSTABLE WALL BRACKET

Used to anchor the chimney/flue to the wall. Its peculiarity is that the distance from the wall can be adjusted.

staffa-a-muro-regolabile

Codice Dn A B C D
4533 0080 80 75 155 160 57
4533 0100 100 85 165 180 77
4533 0120 120 95 175 210 82
4533 0130 130 100 180 210 82
4533 0140 140 105 185 230 92
4533 0150 150 110 190 230 92
4533 0160 160 115 195 230 92
4533 0180 180 125 205 260 107
4533 0200 200 135 215 280 117
4533 0230 230 150 230 310 132
4533 0250 250 160 240 330 142
4533 0300 300 185 265 380 167
4533 0350 350 210 290 430 192
4533 0400 400 235 315 480 217

ADJUSTABLE WALL COLLAR (EVERY 2 M)

Used to anchor the chimney, flue and smoke duct to the wall. Its peculiarity is that the distance from the wall can be adjusted.

collare-a-parete-regolabile

Codice Dn A B
4120 0080 80 140 200
4120 0100 100 150 210
4120 0120 120 160 220
4120 0130 130 165 225
4120 0140 140 170 230
4120 0150 150 175 235
4120 0160 160 – –
4120 0180 180 – –
4120 0200 200 – –
4120 0230 230 – –
4120 0250 250 – –
4120 0300 300 – –
4120 0350 350 – –
4120 0400 400 – –

SPACER COLLAR

This component is necessary for centring the duct inside the shaft/equipment slot.

collare-distanziatore

Codice Dn A
4521 0080 80 170
4521 0100 100 190
4521 0120 120 210
4521 0130 130 220
4521 0140 140 230
4521 0150 150 240
4521 0160 160 250
4521 0180 180 270
4521 0200 200 290
4521 0230 230 320
4521 0250 250 340
4521 0300 300 390
4521 0350 350 440
4521 0400 400 490

CHIMNEY WALL SUPPORT

This component is necessary for supporting the chimney/flue if there are no other existing supports. Consult the “Compressive Strength” chart for the self-support values.

supporto-camino-muro

Codice Dn A B C A/2
4519 0080 80 250 241 125 125
4519 0100 100 250 241 125 125
4519 0120 120 250 241 125 125
4519 0130 130 250 241 125 125
4519 0140 140 250 241 125 125
4519 0150 150 250 241 125 125
4519 0160 160 250 241 125 125
4519 0180 180 333 320 200 166,5
4519 0200 200 333 320 200 166,5
4519 0230 230 333 320 200 166,5
4519 0250 250 333 320 200 166,5
4519 0300 300 400 320 200 200
4519 0350 350 500 320 200 250
4519 0400 400 500 320 200 250

WIND ANCHORING RING

To use for bracing a chimney that has no other kind of support.

anello-camino-vento

Codice Dn
4532 0080 80
4532 0100 100
4532 0120 120
4532 0130 130
4532 0140 140
4532 0150 150
4532 0160 160
4532 0180 180
4532 0200 200
4532 0230 230
4532 0250 250
4532 0300 300
4532 0350 350
4532 0400 400

FEMALE COUPLING STAINLESS STEEL PLUG

Used as closing plug. The female socket allows the closing of all male couplings. It is also available in the male socket version, art. 45130.

tappo-inox-innesto-femmina

Codice Dn A
45131 0080 80 75
45131 0100 100 79
45131 0120 120 82
45131 0130 130 85
45131 0140 140 87
45131 0150 150 89
45131 0160 160 91
45131 0180 180 95
45131 0200 200 98
45131 0230 230 95
45131 0250 250 109
45131 0300 300 107
45131 0350 350 112
45131 0400 400 115

PLUG FOR A COMPENSATORY INLET

This component allows air to enter the chimney or shared flue. The free section is expressed in cm2 in column C.

tapo-presa-compensazione

Codice Dn A B C
4544 0080 80 67 40 13
4544 0100 100 71 40 16
4544 0120 120 74 40 29
4544 0130 130 77 40 35
4544 0140 140 79 40 45
4544 0150 150 81 40 48
4544 0160 160 83 40 54
4544 0180 180 87 40 79
4544 0200 200 90 40 99
4544 0230 230 87 40 139
4544 0250 250 101 40 162
4544 0300 300 99 40 241
4544 0350 350 – – –
4544 0400 400 – – –

CONVERSE COVERING (TO COUPLE WITH THE CONVERSES)

This component is to be used as flashing to tighten on the pipe. Coupled with converse code 4510…. and code 4511…. prevents water from infiltrating.

copertina-conversa

Codice Dn A B
4512 0080 80 60 170
4512 0100 100 60 190
4512 0120 120 60 210
4512 0130 130 60 220
4512 0140 140 60 230
4512 0150 150 60 240
4512 0160 160 60 250
4512 0180 180 60 320
4512 0200 200 60 320
4512 0230 230 60 320
4512 0250 250 60 370
4512 0300 300 60 420
4512 0350 350 60 480
4512 0400 400 60 520

STAINLESS STEEL CONVERSE, SLANTING 5°-30°

To use on roofs with a 5 to 30 degree slant. Coupled with converse covering code 4512…prevents water from infiltrating.

conversa-inox-pendente-5-30

Codice Dn A B C D
4511 0080 80 155 120 485 485
4511 0100 100 155 140 485 485
4511 0120 120 155 160 485 485
4511 0130 130 155 160 485 485
4511 0140 140 155 180 485 485
4511 0150 150 155 180 485 485
4511 0160 160 155 200 485 485
4511 0180 180 180 230 485 485
4511 0200 200 180 250 485 485
4511 0230 230 180 270 612 980
4511 0250 250 245 300 612 980
4511 0300 300 245 350 612 980
4511 0350 350 245 400 715 980
4511 0400 400 245 450 715 980

STAINLESS STEEL CONVERSE, FLAT 0°

To use on flat roofs. Coupled with converse covering code 4512…prevents water from infiltrating.

conversa-inox-pendente-5-30

Codice Dn A B C D
4510 0080 80 155 120 485 485
4510 0100 100 155 140 485 485
4510 0120 120 155 160 485 485
4510 0130 130 155 160 485 485
4510 0140 140 155 180 485 485
4510 0150 150 155 180 485 485
4510 0160 160 155 200 485 485
4510 0180 180 180 230 485 485
4510 0200 200 180 250 485 485
4510 0230 230 180 270 485 485
4510 0250 250 245 300 485 485
4510 0300 300 245 350 612 612
4510 0350 350 245 400 612 612
4510 0400 400 245 450 612 612

CONDENSATION COLLECTION END PLATE

Closing component that can be used as the end part of the pipe with the peculiarity of sliding inside it.

piastra-terminale-raccogli-condensa

Codice Dn A B C
4110 0080 80 495 78 320
4110 0100 100 495 98 320
4110 0120 120 495 118 320
4110 0130 130 495 128 320
4110 0140 140 495 138 320
4110 0150 150 495 148 485
4110 0160 160 495 158 485
4110 0180 180 495 178 485
4110 0200 200 495 198 485
4110 0230 230 495 228 485
4110 0250 250 495 248 485
4110 0300 300 495 298 485
4110 0350 350 495 348 485
4110 0400 400 495 398 485

ROUND SEALING PLUG

Used as a watertight closing plug T200 P1 on a male coupling. The sealing ring conforms to EN 14241/1. In the art.4592 version the sealing ring is replaced by a steel spring by means of which a T600 N1 designation can be obtained.
tappo-tondo-a-tenuta-T200

Codice Dn A B C
4540 0080 80 75 22 88
4540 0100 100 95 22 108
4540 0120 120 115 22 128
4540 0130 130 125 22 138
4540 0140 140 135 22 148
4540 0150 150 145 22 158
4540 0160 160 155 22 168
4540 0180 180 175 22 188
4540 0200 200 195 22 208
4540 0230 230 – – –
4540 0250 250 245 22 258
4540 0300 300 195 22 308
4540 0350 350 – – –
4540 0400 400 – – –

SINGLE-WALL FLAT PLATE FOR SLAB FINISHING

This component is used to restore passage holes in structures and walls. It is not to be used to protect combustible materials. It may also be used on the slant in which case distances A and D vary.
piastra-piana-monoparete

Codice Dn A B C D
45390 0080 80 100 200 330 320
45390 0100 100 120 200 330 320
45390 0120 120 140 200 330 320
45390 0130 130 150 200 330 320
45390 0140 140 160 200 330 320
45390 0150 150 170 200 330 485
45390 0160 160 180 200 330 485
45390 0180 180 200 200 330 485
45390 0200 200 220 200 330 485
45390 0230 230 250 200 330 485
45390 0250 250 270 200 330 485
45390 0300 300 320 200 330 485
45390 0350 350 370 200 330 485
45390 0400 400 420 200 330 485
Prev
Next

Made by Quantik 🚀

Lasciaci il tuo numero di telefono. Ti chiameremo non appena un operatore sarà disponibile.







    Lasciaci il tuo numero di telefono. Ti chiameremo non appena un operatore sarà disponibile.